Water Leak


Water Leak

 

Cause:

All units are designed to evaporate the condensation accumulated under normal operation. Excessive condensation is caused by a leak of humid air in a cooled environment.

 

Humid air is penetrating in the cellar, and condensation occurs on the cold coil.

Placing the cellar on concrete flooring will affect the cooling of the unit.

 

Solution:

For wall mounted cooling units make sure that the unit is leveled.

Prevent air leaks.

Check your instructions for setting. See Manuals in Support 

Check:

The seals of the panels and door in the cabinet are airtight?

In a custom cellar, was the cellar built to specifications indicated in the instructions? See Manuals in Support 

 

For extremely humid periods

NOTE: If unit is operated according to specifications oveflows will not occur. Excess condensation is only caused by extreme conditions. Unit will shut off at 72 °F and will restart when temperature drops or unit is repluged. (In this case insert 3/8” O.D. hose to drain hole, cut to appropriate length.)